Last Updated on February 6, 2022
How to Clean Silver Teapot
“Silver teapot brings a different aura into the experience of a cup of tea that is unparalleled.”
When you get served by a teapot, the elegance is unfathomable compared to a regular tea maker.
If that teapot is a silver plate, then the classiness intensifies a couple of notches.
You feel like you are some noble royalty who is living in an ancient glamorous palace where you are being served the highest degree of tea coming from the most delicate leaves around the kingdom, which is being poured in a magnificent silver cup.
However, adequately cleaning a teapot might be a much more complex feat than one might actually think.
Silver plate teapots are generally built with nickel, brass, or copper, which are polished with a thin layer of pure silver or silver alloy going straight through electrolysis.
A silver plate is only a treat for sore eyes as it’s also long-lasting which can last for a decade or so if it is properly looked after.
Now we come straight to the heart of the matter, as durable as a silver teapot is, it can be severely damaged by dirt and worn out as much as we use it.
In addition, if we don’t place it in a good spot, it can rust in time produced by the traces of sulfur present in the air mixing with the silver polish to result in silver sulfide.
By properly maintaining the silver teapot showcasing a spotless cleaning technique, one can genuinely keep that sparkling shiny glow.
There are two ways people can adequately clean a Silver Teapot. They are:
- Everyday Cleaning Approach
- Deep Cleaning Approach
There is also a required method where How to Clean Silver Teapot daily to keep the glowing shininess. We will call that the polishing approach.
Everyday Cleaning Approach
If you accurately take care of items on a regular basis, the chances are that the items themselves will last longer then it was initially intended to. The same goes for maintaining a silver teapot as if your attention to detail is as accurate as it is, the silver teapot will be sparkling a lot. We don’t need a lot to achieve this feat.
The required materials are a pair of gloves, plenty of water, cloth or soft sponge, nonexistent acid-free liquid soap.
First, you have to know what type of silver teapot you have in your possession. Your silver teapot can either have a clear protective coating or without a protective layer. It is pretty simple to identify which type of coating your silver teapot has, touch any spot you like of the teapot and put some pressure on it with your finger. The results will be –
Now, we move what to do after identifying the type of teapot,
Now, after we are done with the water part, we move on to the soap part.
Now we are in the climax of the washing period.
We now slowly push the teapot in our blend of pre-made soap water and try to wash it thoroughly. The teapot needs to stay at least 3-6 minutes in the water to soak up the soap and smooth down the tea, which remains there. We will then carefully clean it with a soft cloth or a sponge. It’s good to note that we shouldn’t use any steel wool or other more problematic metal-based utensil cleaners as it can cause a large scratch in the silver polishing period.
Now we come to the final step where we clean up the soap with hot water, then properly wipe it with a dry cloth or sponge thoroughly and let it sit there for 1 minute. Thus, it enters the polishing process to radiate with a brightness that we will get to later.
Deep Cleaning Approach
It is essential to deep clean your silver teapot at least a couple of times to avoid the dark spot which appears on the outer side of the silver teapot. Yes, a considerable amount of materials is needed for this approach; hence it’s advised to deep clean about at least 3-4 times.
The required materials are a small amount of baking soda, soft cloth or sponge, a ton of water, a saucepan, and aluminum foil.
The deep cleaning process starts with an adequate amount of water, a contrast to the saucepan, and mix a quarter cup of baking soda till you see the bubbles popping up from the pan as the baking soda dissolves into the water.
Now we will put our silver teapot into the sink, beneath the aluminum foil, and dump the hot water with the mixture of baking soda all over the teapot.
As time goes on till you use your teapot, it begins to fade; however, it’s possible to maintain its shininess for a considerable amount of time.
The required materials are a pair of gloves, silver polish, comfy cloth, an anti-tarnish fabric lining, and a fair amount of water.
To start it off, we put on the gloves and take a bit of silver polish cream or paste of the user’s choice in the soft cloth and carefully rub the paste over the whole outer surface of the silver teapot round and round.
Now, we wash off the teapot with hot water to render the extra polish to naught and immediately dry the teapot with a clean, soft cloth. It’s better to keep in mind that not using an air dryer can leave some unsightly watermarks.
Now the next thing you have to do is store the polished silver teapot in a protected living room drawer or a kitchen drawer and wrap it up with an anti-tarnish fabric lining. The primary reason we wrap the silver teapot is so that it doesn’t come in contact with air and avoid chemical reactions with the silver coating.